One of the benefits of having hand tools, woodworking machinery is that when embarking on a small project you pretty much have everything you’re likely to need. In previous blogs I’ve written about making all sorts of things by hand but one of my frustrations is my accuracy of cutting or chiselling wood. I always have good intentions but the finished results never match my expectation.
Hence getting the CNC machine.
Now I have the means to produce accurate pieces with wood and a some modelling software. Knocking up a sign or box using a pre-programmed design is simple and the results always impress. There are limitations of course, as the machine bed has a maximum capacity of two feet square but for most builds that is sufficient.
Whilst we were on a break in Devon last year, I spotted a wine rack in a shop in Kingsbridge and thought it would be a good project to make at home. I knew I had some oak timber that would be perfect but realised that the rack would need lots of joints and they would need to be neatly done or else it would look a mess.
Firstly I worked out how many rails would be required and went about planing them down to the size I thought would be suitable. I then worked out how to make the tenons and mortise using the CNC and also created a jig to ensure I could get repeatable cuts.
The CNC makes light work this type of job and I was please that the rails connected nice and snug and straight. I used a square to ensure the frames glued up true and left it overnight to ensure it dried well.
Assembling the frame to the rails was then fairly easy and soon it was starting to look like a rack. Once again I glued it up and left it overnight. The next day I rubbed down the frame with some sandpaper and added some rubber feet to the legs to finish it off, leaving it a natural finish rather than finish with any wax or varnish.
The wine rack is now situated in one of our downstairs rooms and fully stocked following a delivery of twelve bottles of wine that my team bought for me at Christmas 🙂